Nearly 10 yards of new rugs on the cloth beam, with plenty of room for more!
About 7 rugs in total.
On that 10-yard warp from May, I was able to get 6-1/2 rugs out of
it. Some of them were experiments to see how much fiber made how much
rug, hence my record-keeping and calculations below each rug. One of
the hardest questions before starting this odyssey was, How much fiber
should I buy / prepare for a regular-sized rug? By that I meant, the
widest rug I could make on my loom Kessenich Floor Loom would be about 28 inches. How long a rug can I make with x pounds of fiber? Read on for my calculations .... I hope this
helps someone else.
Some of them were experiments to see how wide the strips should be ...
It
kind of depends of the fiber. Pendleton's premium merino wool strips
are just about perfect! Those rugs are soft and pliable -- something I
want to have under foot! Those come at about 1-1/2 inches wide.
This shows the Gray Skies Wooly Worms Rug
End of the line for this warp. Not an inch more can pull through ...
I also learned why people get end warp shuttles. They are thinner to accommodate the narrower shed made by the warp getting to the end. It just isn't able to open as wide as it could earlier in it's life.
Time for the big reveal!
Yes, I got brave and cut the new rugs off the loom. Here they are stretched out ...
The adding machine tape helped me keep track of how long a rug I had woven.
Black Watch Pendleton Merino Strips Rug #1
[It's actually pretty square, though it looks wonky in the photo because of my angle to it.]
This is the rug that started it all, and the one for which the warp was designed in purple and blue.
I'd been looking at Tom Knisley's Weave a Good Rug book. This is one of the Pendleton Premium Merino Strip Rugs. When you order them, you can't really choose. You just get what they happen to pull out of the bins and you get and don't complain. I was lucky enough to get a pile of Black Watch strips (my all time favorite of the Scottish plaids!) Gorgeous! It wove up so nicely--it has a softness to it. Just the very thing you want under foot when you get out of bed in the morning!
Now for the details :
28 inches on the loom, under tension
1 smallish ball of strips wove 13 inches on the loom (Sorry--didn't think to weigh that one)
10.2 ounce ball wove 17 inches of fabric
10 oz. ball wove 16 inches of fabric
Final dimensions :
28 x 46 inches on the loom
27 x 42 inches off the loom
I wove a 2nd one of these Black Watch Pendleton Merino Strip Rugs because I had some more strips.
12.10 oz. ball of strips wove 20 inches
9.9 oz ball wove 16 inches of fabric
9.7 oz. ball wove 16 inches of fabric
This means I got a pretty good sized rug out of 2 pounds of Pendleton Premium Merino Strips.
Wa-hooh!
Final Dimensions :
28 x 52 inches on the loom
27 x 47-1/2 inches off the loom
Here's a detail shot, so you can get a better look at the warp colors and how they interact with the merino wool Black Watch Strips. I love it! These are definitely Keepers! And I will definitely be making more of these!
Here's another one made from Pendleton Merino Strips. I had 2 types of gray and red strips, so I put them together. At this point, I still didn't quite have a good sense of how much I'd needof either color strips to make a complete rug -- otherwise, I probably would have spaced them out into a more pleasing pattern.
1 ball 9.25 oz wove 16 inches of fabric on the loom
1 ball 12.9 oz wove 23 inches on the loom
smaller ball wove
[about 2 pounds of fiber]
Final Dimensions
28 in x 47-1/2 on the loom
27-1/2 in x 42-1/2 in off the loom
Note to self : The blue and purple warp disappears with these colors of wool strips, though.
Here's one of the rugs made with Pendleton's Wooly Worms, purchased by the pound.
It's been difficult to get photos where the colors are true for both of these rugs, but here it goes ...
The Wooly Worms are quite a bit thinner strips. As I was working with them, I
had my doubts as to whether or not it would be worth my time and effort.
It was--I was pleasantly pleased with the outcomes -- especially to see the order from
chaos as they progressed line-by-line on the loom.
Batch of Wooly Worms from Pendleton Woolen Mill, OR.
The woolly worms from Pendleton are
clean, but a fair amount of fiber dust comes off them as you work with
them.
Some of the worms were disparate enough and boring gray enough
that I dyed them first in batches of 1-1/4 pounds in an effort to unify
the colors. I knew some would absorb the dye differently, but they
would all come out looking like a set--and they did.
I dyed this batch Cerulean Blue to help unify the colors. About 1-1/4 pounds.
I dyed this batch Kelly Green, but as you can see, most of the color washed away -- It was very old dye, so I'm not surprised. A bit of fuscia did stick, and created a nice dusty rose color, that also unified the batch as a whole. Not Kelly Green, but I'm still happy with it. Again -- about 1-1/4 pounds of fiber.
I did the first
rug mostly laying in lines pulled randomly from my bin. That took longer
than it seemed it should have. Too much diddling between lines, so I eventually decided to sew the ends
together -- again, just pulling them randomly from the bin dyed in the
same vat (Kelly Green which came out more gray and pink (old dye) and
Cerulean Blue which gave me some wonderful sea and shore colors. The randomness brings in some nice texture and added interest.
The
rugs made from woolly worms are thinner, but still wonderfully soft and
pliable--things you'd love to have under your bare feet.
This is the one dyed from the Cerulean Blue batch. very nice earth and sea colors here.
Note -- It's been difficult to get photoes that are true to the actual colors. They seem to change with the time of day, and the light on them -- which is fascinating!
Detail of Earth & Sea Rug made with Pendleton's Woolly Worms.
1-1/4 pounds of fiber wove 28 in x 42 inches on the loom
Final dimensions : 26 x 39 inches
Again, this is a truer image of the colors in this rug, than the full pic above.
Here's the Gray Skies Rug made with Pendleton's Wooly Worms :
[Photo is not quite true to the actual colors.]
[Photo is not quite true to the actual colors.]
1-1/4 pounds of fiber wove into 28 in x 44 inches on the loom.
Finished size : 27 in. 40 inches
This detail shot is truer to the actual colors in this rug than the full shots above.
On to Denim ...
I wanted to try a rug made with denim, or old jeans. Although I had purchased some denim at Joann's when they were having a good sale on it, I didn't use it for this. This rug is from a 2-pound ball of recycled jeans from Rugs in the Woods. Her strips were cut to about 1-1/2 inches wide, and included a really nice variety of colors and textures, as you can see. And I didn't have to do the prep work on the rag ball! Also -- nice soft well-worn denim, not like my new stuff which seems to be more spandex than cotton these days!
It's a very heavy and sturdy rug. I've heard that the denim is do durable and tough in these rugs, that the warp strings wear out long before the denim does.
Not sure I need to do another denim rug, unless someone requests it. I think I'd much rather have the soft and warm woollens underfoot.
The dimensions :
2 pound ball of denim strips from Rugs in the Woods
28in x 39 in rug on the loom, under tension
26-1/2in x 34-1/2in off the loom
Detail of the warp strings interacting with the blue jean weft. Also showing the hem rolled under to the back side. At Tom Kniesley's direction, I wove about 4-5 inches of a double strand of the cotton carpet warp in between each of the rugs. This cab be cut and rolled under as hems, to protect and secure the warp strings. I didn't want to mess around with fringe for these.
